设计参数1.最大承载跨度:直线6米,转角4米2.平台端头最大悬挑长度:

Design Parameters <br><br>1. Maximum load Span: linear 6 meters, angle 4 m <br>2 Maximum platform cantilevered tip length: 2 m <br>3 carrier cantilevered above the maximum height: 6 m <br>4. Single bit enables weight: 3 t <br>5. single point allows the hanging of vertical load: 60KN (including weight) <br>6 single point allows horizontal hanging load: 30KN light <br>7. allowed to climb the wind speed: 14 m / s (work surface wind speed, wind upper stage 6) <br>8. The construction allows the wind speed: 24.5 m / s (work surface wind speed, wind ceiling 9) <br>9. allow construction loads: 3KN layer 2 / layer 3 or 2KN * / m <br>10. The motor power: 0.5 kilowatts <br>11 seats rated lifting force: 5 t /7.5 t <br>12. The seats lifting speed: 180mm / min <br>13. The deviation allows the embedded member: ± 10mm

Design parameters<br><br>1. Maximum carrying span: 6 meters straight line, 4 meters corner<br>2. Platform end maximum suspension length: 2 m<br>3. Maximum suspension height above the frame: 6 m<br>4. Single-position allowed self-weight: 3 tons<br>5. Single-hang point allows vertical load: 60KN (with self-weight)<br>6 Single hang point allowed horizontal load: 30KN light<br>7. Allow climbing wind speed: 14 m/s (operating surface wind speed, 6 wind upper limit)<br>8. Construction wind speed allowed: 24.5 m/s (operating surface wind speed, 9 wind upper limit)<br>9. Construction load allowed: 2 layers 3KN/or 3rd floor x 2KN/m<br>10. Motor power: 0.5 kW<br>11. Position rated lift force: 5 tons/7.5 tons <br>12. Position boost speed: 180mm/min <br>13. Buried allowed horizontal deviation: plus or minus 10mm

Design parameters<br>1. Maximum bearing span: straight line 6m, corner 4m<br>2. Maximum overhang length of platform end: 2m<br>3. Maximum overhang height above the frame: 6M<br>4. Allowable dead weight of single machine: 3T<br>5. allowable vertical load of single hanging point: 60KN (including self weight)<br>6. Allowable horizontal load of single hanging point: 30KN light<br>7. Allowable climbing wind speed: 14m / S (working face wind speed, upper limit of level 6 wind)<br>8. Allowable construction wind speed: 24.5m/s (working face wind speed, upper limit of grade 9 wind)<br>9. Allowable construction load: 2 layers of 3kn / or 3 layers * 2Kn / M<br>10. Motor power: 0.5KW<br>11. rated lifting force: 5 tons /7.5 tons<br>12. Stand lifting speed: 180mm / min<br>13. Allowable horizontal deviation of embedded parts: plus or minus 10 mm