看出为了要使此塑件的整体外观不容易留下腐蚀的痕迹,采用了外侧浇注的方法

看出为了要使此塑件的整体外观不容易留下腐蚀的痕迹,采用了外侧浇注的方法制造。利用侧抽芯和顶出套的结构达到自动脱。经过实验分析在这种塑件外有一个管螺纹,并且工作时需要安装一个侧抽芯,其型芯固定在管螺纹的滑块上并且把管螺纹的滑块直接安装在管螺纹的矩形槽内,这样可以有效保证橡塑件工作的精度和可靠性

看出为了要使此塑件的整体外观不容易留下腐蚀的痕迹,采用了外侧浇注的方法制造。 利用侧抽芯和顶出套的结构达到自动脱。 经过实验分析在这种塑件外有一个管螺纹,并且工作时需要安装一个侧抽芯,其型芯固定在管螺纹的滑块上并且把管螺纹的滑块直接安装在管螺纹的矩形槽内,这样可以有效保证橡塑件工作的精度和可靠性

It can be seen that in order to make the overall appearance of the plastic parts not easy to leave traces of corrosion, the method of outer pouring is used to manufacture. The structure of side core pulling and ejector sleeve is used to achieve automatic separation. After experimental analysis, there is a pipe thread outside the plastic part, and a side core pulling is needed to be installed when working. The core is fixed on the sliding block of the pipe thread and the sliding block of the pipe thread is directly installed in the rectangular groove of the pipe thread, which can effectively ensure the precision and reliability of the rubber plastic part.<br>