1. 立即在品保系统内增加可焊性的检验项次，将CP线可焊性检测项目增加

1. Immediately increase the solderability inspection items in the quality assurance system, and increase the CP line solderability inspection items to the sixth solderability test in the quality assurance inspection system. (See appendix 1 for new screenshots of the inspection items of the quality assurance system) <br>2. Train new / in-service quality inspectors. If any inspection items in the system are found to be inconsistent with the "Raw Material Control Plan" during the inspection process, the IQC Section Chief shall be reported in time / Supervisor and make changes. (See Attachment 2 Training Record of Quality Inspector) <br>3. On April 8, 2020, the CP line was inspected according to the "Raw Material Control Plan" and included in the system management. (See Attachment 3 CP Line Incoming Inspection Report) <br>4. Check the quality assurance system for other raw material inspection items for similar conditions causing the system to be missing.

1. Immediately add the weldability test in the quality assurance system, and add the CP wire weldability test item to the 6th solderability test of the quality assurance system. (See Annex 1 New screenshot of product insurance system inspection items)<br>2. Training of new/on-the-job product inspectors, and timely report ingress/supervisor sqispere and make changes in the course of inspection if they find that the inspection items in the system are inconsistent with the Raw Material control plan. (See Annex 2 Product Inspector Training Record)<br>3. The CP line has been tested and integrated into the system since 8 April 2020 under the Raw Materials Control Plan. (See Annex 3 CP line feed inspection report)<br>4. Check the quality assurance system for other raw material inspection items for similar conditions resulting in the system is missing.

1. Immediately add the weldability inspection items in the quality assurance system, and add the weldability inspection items of CP line to Item 6 of the quality assurance inspection system. (see Annex 1 screenshot of new inspection item of quality assurance system)<br>2. Train the new / on-the-job quality inspectors. In case of any inconsistency between the inspection items in the system and the raw material control plan in the inspection process, report to the IQC section chief / Supervisor in time and make modifications. (see attachment 2 training record of quality inspector)<br>3. The CP line has been inspected and incorporated into the system management according to the raw material control plan since April 8, 2020. (see Annex 3 incoming inspection report of CP line)<br>4. Check whether other raw material inspection items of the quality assurance system are similar and cause system missing.<br>