Machine error statesMachine errors are split up into the 2 following categories:Warnings: These are errors which are specific to the corresponding lane. When such an error is issued, the lane in question stops and the warning is shown on the display. The lane and segment which have caused the error are shown in the display. Note:For machines with more than one lane, the remaining lanes will continue to run.Once the error has been located and corrected, press the „F1“ key to acknowledge the warning and the lane will continue in automatic mode.Failures: These are errors which are not specific to a particular lane, but to the whole machine. In this case, the complete machine will come to a haltOnce the error has been located and corrected, press the „F1“ key to acknowledge the warning and the machine will return to the standby/start page.Note:For comprehensive information on all warnings and errors including cause and effect charts, please refer to chapter 7 "Appendix - Machine error messages