飞轮轴承又叫做导向轴承，是安装在曲轴后方或者飞轮中心的孔上，因为飞轮轴

Flywheel bearings, also called guide bearings, are installed behind the crankshaft or in the hole in the center of the flywheel. Because the function of the flywheel bearings is to guide and prevent the radial runout of a shaft when the clutch is disengaged, many people are also called flywheel guide bearings. . After damage, there will be a certain amount of noise and noise when starting. After a period of excessive wear, the noise will decrease or disappear, which will seriously affect the life of the first shaft bearing of the gearbox, resulting in a week of loose bearings. In severe cases, the gearbox will make abnormal noise when neutral, step down The sound of the clutch pedal disappears. In view of this situation, it is necessary to replace it. It is necessary to disassemble the gearbox assembly. The repair cost is very expensive.

Flywheel bearings, also known as guide bearings, are installed behind the crankshaft or on the hole in the center of the flywheel, because the role of the flywheel bearings is to guide, in the clutch separation state to prevent the radial bounce of an axis, so many people are also known as flywheel guide bearings. After damage, there will be a certain amount of noise and noise at the beginning. After a period of excessive wear will appear after the noise reduction or disappearance of the situation, will seriously affect the life of the transmission first shaft bearings, resulting in a week of loose bearings, serious will appear when the transmission noise, when the clutch pedal when the sound disappears, in view of this situation is necessary to replace, is the need to dismantle the transmission assembly, repair costs are very expensive.

Flywheel bearing, also known as guide bearing, is installed on the hole behind the crankshaft or in the center of the flywheel. Because the function of flywheel bearing is to guide, it can prevent the radial run out of a shaft when the clutch is separated. Therefore, many people also call it flywheel guide bearing. After damage, there will be some noise and noise when starting. After a period of excessive wear and tear, the noise will decrease or disappear, which will seriously affect the service life of the first shaft bearing of the gearbox, resulting in the looseness of the bearing for one week, and even the abnormal noise of the gearbox when it is in neutral, and the noise will disappear when the clutch pedal is pressed. In view of this situation, it is necessary to replace the gearbox assembly, and repair it It's very expensive.<br>