1、将此问题立即反馈生产线，要求生产线在干烧岗位进行大档干烧后，功能岗

1. Immediately report this problem to the production line. After the production line is required to carry out large-scale dry-burning in the dry-burning position, the functional position needs to check whether there is still a phenomenon of ignition when the heating wire connector is energized. Select the defective products and then pull down after dry-burning. Until the product has no such bad phenomenon, pull down after passing the functional test.

1, this problem will be immediately feedback to the production line, require the production line in the dry burning post for large dry burning, functional post needs to check the heating wire patch when the power is still there, bad products picked out to do dry burning after pull-down, until the product does not have this undesirable phenomenon, after the functional test qualified pull-down.

1. The problem was immediately fed back to the production line, and the production line was required to conduct large-scale dry burning at the dry burning post. The functional post should check whether there was still ignition phenomenon when the heating wire connector was electrified. The defective products were selected and then dried and pulled down until the product did not have such undesirable phenomenon, and then pull down after the functional test was qualified.<br>