负责WorkCell（Infinera(Nokia),Elenion,

Responsible for the whole process of WorkCell (Infinera (Nokia), Elenion, ZTE Optoelectronics) new project to customer quality assurance, including: <BR>1. Full follow-up of the new project AQP system, including customer SPEC Gap analysis, and consistent quality plan communication with customers Confirmation of various clauses, specific transformation required by customers, confirmation of RD transfer results, risk assessment of each station, control nodes to ensure the preliminary quality risk review, complete identification, and minimize the early problems to the mass production stage. <BR>2. Raw material input , Including SIP formulation, inspection standard formulation/bad risk assessment, concession acceptance and other processing. <BR>3. Handling of raw material quality issues, including defect determination, supplier communication, improvement follow-up and claims, etc. (SQE) <BR>4. Process quality problem handling, including process control point setting, MES control, traceability management, IPQC audit management/OBA control , And the determination of quality problems in the process, containment of defective parts, analysis of defects, tracking and resolution of improvement measures (including communication with RD/engineering/suppliers, etc.) (PQE) <BR>3. Leading customer complaints/RMA parts return processing, Failure analysis, bad maintenance, bad improvement, report submission, improvement measures follow-up. (CQE

Responsible for quality assurance throughout the customer process for new projects at WorkCell (Nokia), Elenion, ZTE Optical Electronics, including:<BR>1. The new project AQP system follow-up, including customer SPEC Gap analysis, communication with customers consistent quality planning document terms confirmation, customer requirements of the specific transformation, RD transfer results confirmation, each station risk assessment, control nodes, to ensure the pre-quality risk audit, full identification, minimize the pre-production problems to the production stage.<BR>2. Raw material feed, including SIP formulation, inspection standard-setting / bad risk assessment, concession reception and other treatment.<BR>3. Handling of raw material quality issues, including defect determination, supplier communication, improved follow-up and claims (SQE)<BR>4. Process quality problem handling, including process control point setting, MES control, traceability management, IPQC audit management /OBA control, and process quality problem determination, bad parts containment, bad analysis, improvement measures tracking and resolution (including communication with RD/engineering/supplier, etc.) (PQE)<BR>3. Leading customer complaints/RMA return processing, fault analysis, poor maintenance, poor improvement, report submission, improvement measures follow-up. (CQE).

Responsible for the whole process from new project of workcell (infinera (Nokia), elenion, ZTE Optoelectronics) to customers, responsible for quality assurance, including:<BR>1. The AQP system of new project follows up the whole process, including customer spec gap analysis, confirmation of all terms of quality planning document consistent with customer communication, specific transformation of customer requirements, confirmation of RD handover results, risk assessment of each work station, and control nodes, so as to ensure the early quality risk audit and complete identification, and minimize bringing the early problems to the mass production stage<BR>2. Raw material feeding, including SIP formulation, inspection standard formulation / adverse risk assessment, concession acceptance, etc.<BR>3. Deal with raw material quality problems, including defect determination, supplier communication, improvement follow-up and claim (SQE)<BR>4. Process quality problem handling, including process control point setting, MES control, traceability management, IPQC audit management / oba control, determination of process quality problems, containment of defective parts, defect analysis, tracking and solution of improvement measures (including communication with rd / Engineering / suppliers, etc.) (PQE)<BR>3. Lead customer complaint / RMA parts return handling, fault analysis, defective maintenance, defect improvement, report submission, improvement measures follow-up. (CQE<BR>