在2020年04月22日，终检反馈GTL、EST车型示廓灯总成与线束插

在2020年04月22日，终检反馈GTL、EST车型示廓灯总成与线束插头连接后，接触不实，示廓灯不亮或闪亮故障，故障件与初始供货零部件端子（插片）拆检对比发现，合格零部件端子安装平齐，端子长度为10.4mm, 故障零部件端子安装不平齐，端子长度分别为9mm和8.6mm, 零部件不合格，造成与与线束插头连接后，接触不实，示廓灯不亮或闪亮故障。影响使用性能，建议暂停1月。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

On April 22, 2020, after the final inspection, the GTL and EST profile light assembly was connected to the harness connector, the contact was not real, the profile light was not bright or flashing, and the faulty parts were connected to the original parts ( Inserts) Disassembly and inspection comparison found that the terminals of qualified components are flush, the length of the terminals is 10.4mm, the terminals of faulty components are not flush, the length of the terminals is 9mm and 8.6mm, and the components are unqualified, resulting in connection with the harness plug After that, the contact is not real, and the profile lights are not bright or flashing. Affecting the performance, it is recommended to suspend January.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

On April 22, 2020, the final inspection feedback GTL, EST model profile lamp assembly and the harness plug connection, contact is not true, the position lamp is not lit or shiny fault, the faulty part and the initial supply component terminal (insert) disassembly comparison found that the qualified component terminals installed flush, terminal length of 10.4mm, The terminals of the faulty components are not installed well, the terminal length is 9mm and 8.6mm respectively, the components are not qualified, resulting in the connection with the harness plug, the contact is not true, The profile light is not lit or shiny. Affects usage performance, it is recommended to pause for January.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

On April 22, 2020, after the final inspection fed back that the clearance lamp assembly of GTL and EST models was connected with the harness plug, the contact was not real, the clearance lamp was not on or flashing, and the terminal (plug-in) of the faulty parts and the initial supply parts was disassembled and inspected. It was found that the terminal of the qualified parts was installed flush, the terminal length was 10.4mm, the terminal of the faulty parts was installed unevenly, and the terminal length was 9mm and 8.6MM respectively, If the parts are unqualified, the contact with the harness plug is not true, and the clearance lamp is not on or flashing. It is recommended to suspend for 1 month due to the impact on the service performance.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.