Turn on the power, open the door of the control box, observe whether the two circuit breakers in the two distribution boxes are in the on state, and close the door after confirming that they are in the on state. Turn the power switch on the panel of the control box to the right to turn on the power (power on). At this time, first switch the "manual/automatic" switch to manual mode, and manually start and stop the hoist, agitator, grain transfer and fan Equipment, observe whether there is any abnormality in these equipments, and check each equipment one by one. After all the equipments are operating normally, you can switch the "manual/automatic" switch to the automatic mode.
正在翻译中..