The rated input or rated current shall be at least 110 % of the measured no-load input or current.Compliance is checked by measuring the power input or current of the tool when stabilized while all circuits which can operate simultaneously are in operation. The test shall be conducted without accessories attached or external load.For tools marked with one or more rated voltages, the test is made at each of the rated voltages. For tools marked with one or more rated voltage ranges, the test is made at both the upper and lower limits of the ranges, unless the marking of the rated input is related to the mean value of the relevant voltage range, in which case the test is made at a voltage equal to the mean value of that range.