1.油浴式空气滤清器使用前必须加入机油至油面线高度(3.5L)2.按季

1. an oil bath air filter prior to use oil must be added to the oil line height (3.5 L) <br>2. Press season using the same grade of engine oil. <br>In areas winter temperatures above -10 ℃, the perennial use 40 # oil. <br>At a temperature below -10 ℃ in winter, in order to prevent the oil from condensation affect filtering effect, the temperature drop every 5 ℃ need <br>adding 10% of the oil in the hydraulic oil # 46. <br>Note: Before adding hydraulic oil, decanted oil pan for an identical volume of oil. <br>Refueling as follows: <br>1. Loosen screw oil pan, removing the oil pan. Removal of the filter assembly, the oil poured into the oil pan. First into the <br>filter cartridge, the refill ring, then charged under the filter assembly, oil pan, a uniform set screw fastening, to prevent oil leakage. <br>2. Each traveling 10,000 kilometers, remove the oil pan, the cleaning, the lower filter assembly, oil pan and oil changes. <br>The vehicle with a large concentration of dust in the environment, the filter cleaning cycle should be shortened.

1. Oil must be added to the oil surface height (3.5L) before use of the oil bath air filter<br>2. Use the same grade oil as the engine according to the season.<br> In areas where winter temperatures are above -10C, 40o oil can be used throughout the year.<br> In areas where winter temperatures are below -10C, in order to prevent oil condensation from affecting the filtration effect, the temperature needs to be<br>The oil is filled with 10% of the 46-hydraulic oil.<br>Note: Before adding hydraulic oil, pour out the same volume of oil in the storage tray.<br>The refueling method is as follows:<br>1. Release the fixing screw of the oil storage tray and remove the oil storage tray. Remove the filter assembly and pour the oil into the oil storage tray. Load on first<br>Filter assembly, and then install the seal ring, and then loaded into the filter cylinder assembly, oil storage plate, uniform fastening the fixing screws to prevent oil seepage.<br>2. For every 10000 km, remove the oil storage tray, clean the upper and lower filter assembly, oil storage plate, and change the oil.<br>3. The vehicle should shorten the filter cleaning cycle appropriately when driving in an environment with a high concentration of dust.

1. Oil must be added to the oil level line before using the oil bath air filter (3.5L)<br>2. Use engine oil of the same brand as the engine according to the season.<br>In winter, the temperature is higher than - 10 ℃, 40 × oil can be used all year round.<br>In winter, when the temperature is lower than - 10 ℃, in order to prevent the oil condensation from affecting the filtering effect, it is necessary to keep the temperature at<br>Add 10% 46 × hydraulic oil into the engine oil.<br>Note: before adding hydraulic oil, pour out the same volume of oil in the oil pan.<br>The refueling method is as follows:<br>1. Loosen the fixing screws of the oil pan and remove the oil pan. Remove the filter element assembly and pour the oil into the oil pan. Loading first<br>Filter element assembly, then install the sealing ring, then install the lower filter element assembly and oil storage pan, and tighten the fixing screws evenly to prevent oil leakage.<br>2. Every 10000 km, remove the oil pan, clean the upper and lower filter element assembly and oil pan, and change the oil.<br>3. When the vehicle is driving in the environment with high dust concentration, the cleaning cycle of filter element shall be shortened appropriately.<br>