软母线制安施工方法母线的下料长度应根据计算结果和设备连接确定。金具安装

Soft busbar manufacturing and installation construction method <br>The cutting length of the busbar should be determined based on the calculation results and equipment connections. <br>Installation of hardware, installation of insulator strings, and busbar suspension should be carried out in sequence. <br>After the busbars are installed, check whether the slacks of busbars of the same grade are consistent, and adjust them in time if they are inconsistent. <br>Structural support assembly construction method

Construction method for manufacturing and installing flexible busbar<br>The cutting length of the busbar should be determined based on the calculation results and equipment connection.<br>Hardware installation, insulator string installation, and busbar suspension should be carried out in sequence.<br>After the busbar is installed, it is necessary to check whether the sag of the busbar at the same level is consistent. If there is any inconsistency, it should be adjusted in a timely manner.<br>Construction method for assembling and erecting structural supports

Construction method of soft bus safety system<br> The blanking length of bus should be determined according to the calculation results and equipment connection.<br> Hardware installation, insulator string installation and bus suspension shall be carried out in turn.<br> After the bus is hung, check whether the bus sag of the same gear is consistent, and adjust it in time if it is inconsistent.<br> Construction method of structural support assembly