点击获取验证码，云端即为您自动生成，无需手动填写；云验证码登录仅用于应

点击获取验证码，云端即为您自动生成，无需手动填写；云验证码登录仅用于应急场景，系统将会记录此次操作，请谨慎使用登录钉钉扫描二维码登录登录失败，请重新获取验证码登录无法写入激活文件，请将设备恢复出厂设置后重试。或联系值班IT。获取钉钉应用id失败，请稍后刷新重试当前应用未申请蓝牙访问权限当前应用已授权蓝牙访问权限当前设备未打开蓝牙当前设备已打开蓝牙当前设备未连接任何蓝牙设备当前设备蓝牙已连接到{bondedDevice}当前应用未申请摄像头访问权限当前应用已授权摄像头访问权限无法使用前置摄像头无法使用后置摄像头当前设备前后摄像头运转正常SDK未支持这个诊断子项当前设备网络不可用当前设备没有连接“KAOQIN”WiFi当前设备网速低于{netSpeed}kb/s当前设备网速为{netSpeed}kb/s，符合预期当前应用IOT重连次数：当前应用IOT重连次数：{IOT_RETRY_COUNT}，符合预期-- DNS 解析成功-- DNS 解析失败，未能获取到IP地址请求网关{first}失败，失败原因：{third},网络探测结果为：{traceroute}请求网关{first}耗时为{triple}ms > {accessTime}ms请求网关{first}耗时为{second}ms，符合预期

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

Click to get the verification code, and the cloud will automatically generate it for you, no need to fill it in manually; cloud verification code login is only for emergency scenarios, the system will record this operation, please use caution to log in to DingTalk . Scan the QR code to log in. If the login fails, please try again. Obtaining the verification code to log in cannot write the activation file. Please restore the device to factory settings and try again. Or contact IT on duty. Failed to obtain the DingTalk application ID. Please refresh and try again later. The current application has not applied for Bluetooth access permission. The current application has authorized Bluetooth access permission. The current device has not turned on Bluetooth. The current device has turned on Bluetooth. The current device is not connected to any Bluetooth device. The current device Bluetooth is connected to {bondedDevice} The current application has not applied for camera access. The current application has authorized camera access. The front camera cannot be used. The rear camera cannot be used. The front and rear cameras of the current device are operating normally. The SDK does not support this diagnostic sub-item. The current device network is not available. The current device is not connected." KAOQIN” WiFi The current device network speed is lower than {netSpeed}kb/s The current device network speed is {netSpeed}kb/s, in line with expectations The number of current application IOT reconnections: The current application number of IOT reconnections: {IOT_RETRY_COUNT}, in line with expectations - - DNS resolution successful - DNS resolution failed. The IP address could not be obtained . The request for gateway {first} failed. The reason for failure was {third}. The network detection result was: {traceroute}. The request for gateway {first} took {triple}ms. > {accessTime}ms requesting gateway {first} takes {second}ms, in line with expectations

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

Click to obtain the verification code, and the cloud will automatically generate it for you, without the need for manual filling; Cloud verification code login is only used for emergency scenarios, and the system will record this operation. Please use it with caution Login Nail Scan QR Code Login Login failed, please obtain the verification code again to log in Unable to write activation file, please restore the device to factory settings and try again. Or contact the IT on duty. Failed to obtain the nail application ID. Please refresh and try again later The current application has not applied for Bluetooth access permission The current application has authorized Bluetooth access permissions The current device does not have Bluetooth turned on The current device has Bluetooth turned on The current device is not connected to any Bluetooth devices The current device Bluetooth is connected to {bondedDevice} The current application has not applied for camera access permission The current application has authorized camera access permissions Unable to use front facing camera Unable to use rear camera The front and rear cameras of the current device are operating normally SDK does not support this diagnostic sub item The current device network is not available The current device is not connected to "KAOQIN" WiFi The current device network speed is lower than {netSpeed}kb /S The current device network speed is {netSpeed}kb /s. Meets expectations Current application IOT reconnection count: The current number of IOT reconnection attempts for the application is {IOT.RETRY-COUNT}, which meets expectations --DNS resolution successful --DNS resolution failed, unable to obtain IP address Request gateway {first} failed with reason: {third}, network probe result: {traceroute} Requesting gateway {first} takes time {triple}ms > {accessTime}ms Requesting gateway {first} takes time {second}ms , as expected

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

Click to get the verification code, and the cloud will automatically generate it for you, without manual filling; Cloud verification code login is only used for emergency scenarios, and the system will record this operation, so please use it with caution. log in Nail scanning QR code login Login failed. Please login again with verification code. Unable to write the activation file, please restore the device to factory settings and try again. Or contact IT on duty. Failed to obtain nail application id. Please refresh later and try again. The current application has not applied for Bluetooth access rights. The current application has authorized Bluetooth access. Bluetooth is not turned on in the current device. The current device has Bluetooth turned on. The current device is not connected to any Bluetooth device. Bluetooth of the current device is connected to {bondedDevice} The current application has not applied for camera access. The current application has authorized camera access. The front camera cannot be used. The rear camera cannot be used. The front and rear cameras of the current device are operating normally. The SDK does not support this diagnostic subitem. The current device network is unavailable. The current device is not connected to "Kao Qin" WiFi. The current device network speed is lower than {net speed} KB/s. The current network speed of the equipment is {netSpeed}kb/s, which is in line with expectations. Current application IOT reconnection times: IOT reconnection times of current application: {IOT_RETRY_COUNT}, which is in line with expectations. -- DNS resolution succeeded. -- DNS resolution failed, and IP address could not be obtained. The request for gateway {first} failed, the failure reason is {third}, and the network detection result is {traceroute}. It takes {triple}ms > {accessTime}ms to request gateway {first}. It takes {second}ms to request the gateway {first}, which is expected.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.