在拆除模板时，应先拆除侧边模板的支撑加固系统，然后在拆模时要保证混凝土

When removing the formwork, the support and reinforcement system of the side formwork should be removed first, and then when removing the formwork, it is necessary to ensure that the concrete strength surface and edges and corners are not damaged due to the removal of the formwork. The prying tool must be used correctly when removing the mold, and the side mold of the beam should be pushed outward, instead of pulling it inward, so that the edges and corners of the beam should be easily removed. Clean the joints of the removed template in time, apply release agent, clean the removed fasteners, and collect and manage them in time.

When removing the template, the support reinforcement system of the side template should be removed first, and then the concrete strength surface and angular angle should not be damaged by the mold removal. When tearing down the mold to use the correct, should push out the beam side mold, and should not pull inward, so easy to tear down the beam on the corner. The removed template will be removed in time to clean the connection, paint release agent, remove the fastener clean, timely centralized collection and management.

When the formwork is removed, the support and reinforcement system of the side formwork shall be removed first, and then the concrete strength surface and edges and corners shall not be damaged due to the formwork removal. The prying tools should be used correctly when removing the formwork. The beam side formwork should be pushed outward instead of pulled inward, which is easy to damage the upper edge of the beam. Clean the joints of the removed formwork in time, brush the release agent, clean the removed fasteners, and collect and manage them in time.<br>