通过考察高速分散器、超声细胞破碎机和IS-RPB三种乳化装置对细乳液液

By examining the high-speed disperser, ultrasonic impact crusher three kinds of cells, and IS-RPB emulsifying apparatus miniemulsion droplet size and the settling time, to obtain an appropriate operating condition of the milk produced. Next, the operation of the power miniemulsion] Three comparative emulsifying apparatus. Suitable operating conditions for preparation of the miniemulsion of a high speed disperser as follows: dispersing time was 4 min, oil-water two-phase mixed mass is 110 g, a high speed disperser power was 360 W; ultrasonic cell disruption mechanisms prepared miniemulsion suitable operating conditions: Dispersion Time to 5 min, oil-water two-phase mixed mass is 110 g, the ultrasonic power is 380 W; optimum operating conditions for preparation of the miniemulsion iS-RPB as: gravity factor of 65.32, a liquid flow rate of 60 L h-1, the motor power is 750 W, where 60 L h-1 = 1000 g min-1.

By examining the effect of high-speed disperser, ultrasonic cell crusher and IS-RPB three emulsifier devices on the size and stabilization time of the fine emulsion droplets, the appropriate conditions for milk-making operation were obtained. The operating power consumption of the preparation of fine emulsion spree of three emulsified devices is compared. The suitable operating conditions for the preparation of fine emulsion soforis are: 4 min dispersion time, oil-water two-phase mixing mass of 110 g, high-speed disperser power of 360 W; The suitable operating conditions for the preparation of fine emulsion is: 65.32 overweight force factor, 60 L h-1 liquid flow, motor power of 750 W, of which 60 L h-1 is 1000 g min-1.

The effects of high-speed disperser, ultrasonic cell crusher and IS-RPB three emulsifying devices on the size and stability time of miniemulsion droplets were investigated. The operation power consumption of miniemulsion prepared by three emulsifying devices is compared. The suitable operation conditions for the preparation of miniemulsion from high speed disperser are: dispersing time is 4 min, oil and water mixing quality is 110 g, and high speed disperser power is 360 W; the suitable operation conditions for preparing miniemulsion by ultrasonic cell breakage mechanism are: dispersing time is 5 min, oil and water two-phase mixing quality is 110 g, ultrasonic power is 380 W, and the suitable operation condition of IS-RPB miniemulsion preparation is: super gravity. Factor is 65.32, liquid flow is 60 l H-1, motor power is 750 W, 60 l H-1 = 1000 g min-1.