装置改造，采用密相环流预汽提快分器(CSC)替代原有的三叶形快分，将原

The transformation of the device adopts a dense-phase circulating flow pre-stripping fast separator (CSC) to replace the original three-lobe fast separator, cut off the original three-lobe fast separator at the outlet of the riser, and raise the riser by about 3m. Replaced with 3 coarse spin fast separators with dense-phase circulation pre-stripper, add 2 steam pipes with perforated plates for each coarse spin to enter the lower leg of the coarse spin to make pre-stripping steam, a total of 6 groups of steam

Device transformation, the use of dense-phase circulation pre-steam lift speed divider (CSC) to replace the original trilobite-shaped fast division, the original lift pipe export three-leaf fast-splitter fast-splitting cut off, lift pipe height of about 3m, replaced with 3 with dense-phase circulation pre-steam lift coarse-rotation fast divider, each coarse rotation added 2 steam pipe with a hole plate into the coarse-rotating lower legs to do pre-steam lift steam, a total of 6 groups of steam

In the revamping of the unit, the dense phase circulating pre stripping fast separator (CSC) is used to replace the original trilobal fast separator. The original trilobal fast separator at the outlet of the riser is cut off, the riser is increased by about 3M, and three coarse rotary fast separators with dense phase circulating pre stripping are replaced. Two steam pipes with orifice plates are added to each coarse rotary to enter the lower material leg of the coarse rotary for pre stripping steam, a total of 6 groups of steam<br>