每次将电解液装入含浸缸前，需测试电解液各参数（CON、PH、SV、氯离

The electrolyte parameters (CON, PH, SV, chloride ion, water content) must be tested before each time the electrolyte is loaded into the impregnation tank. After the test is OK, it can be loaded into the impregnation tank for impregnation. If there is no product in the impregnation tank, the electrolyte needs to be tested every shift, and all test parameters are recorded in the quality assurance system

Each time the electrolyte is loaded into the immersion cylinder, the parameters of the electrolyte (CON, PH, SV, chloride ions, moisture content) need to be tested before the test OK can be loaded into the immersion cylinder for immersion. If the immersion cylinder is not product-loaded, the electrolyte needs to be tested once per shift and all test parameters are recorded in the quality protection system

Each time before the electrolyte is loaded into the immersion tank, the parameters of the electrolyte (con, pH, SV, chloride ion, moisture content) should be tested. After the test is OK, the electrolyte can be loaded into the immersion tank for immersion. If there is no product in the immersion tank, the electrolyte should be tested once a shift, and all test parameters should be recorded in the quality assurance system<br>