The laser tracker has excellent accuracy and sub-micron resolution for的简体中文翻译

The laser tracker has excellent acc

The laser tracker has excellent accuracy and sub-micron resolution for the line of sight distance, measured with its internal DMI. The angular measurements are accurate to 0.5-1 arcsecond after a standard calibration using the commercial software. For the GMT measurement, this leads to errors in lateral displacement of 50-100 µm. Ideally, the tracker would be mounted at the center of curvature of the optic, which minimizes the sensitivity to angles. In practice, this point is not accessible for some optics, including convex optics and the GMT segment, whose center of curvature is 38 m above the segment and outside the Mirror Lab. The geometry for this system is shown in Figure 5. The angle , which is the deviation of the line of sight from the surface normal, is calculated approximately for a spherical mirror,
0/5000
源语言: -
目标语言: -
结果 (简体中文) 1: [复制]
复制成功!
激光跟踪器具有用于视距的线,其内部DMI测量精度优异和亚微米的分辨率。角测量使用商业软件标准校准后精确到0.5-1角秒。对于GMT测量,这导致错误在50-100微米的横向位移。理想的情况下,跟踪器将被安装在光学器件,其中的角度的敏感性最小化的曲率中心。在实践中,这点是不适合某些光学,包括凸光学器件和GMT段,其曲率中心为38米段上方与镜实验室外部接近。该系统的几何形状在图5中所示的角度,这是视线从表面线的偏离正常的,大致为一球面镜计算
正在翻译中..
结果 (简体中文) 2:[复制]
复制成功!
The laser tracker has excellent accuracy and sub-micron resolution for the line of sight distance, measured with its internal DMI. The angular measurements are accurate to 0.5-1 arcsecond after a standard calibration using the commercial software. For the GMT measurement, this leads to errors in lateral displacement of 50-100 µm. Ideally, the tracker would be mounted at the center of curvature of the optic, which minimizes the sensitivity to angles. In practice, this point is not accessible for some optics, including convex optics and the GMT segment, whose center of curvature is 38 m above the segment and outside the Mirror Lab. The geometry for this system is shown in Figure 5. The angle , which is the deviation of the line of sight from the surface normal, is calculated approximately for a spherical mirror,
正在翻译中..
结果 (简体中文) 3:[复制]
复制成功!
激光跟踪器具有良好的精度和亚微米的视距分辨率,由其内部DMI测量。使用商用软件进行标准校准后,角度测量值精确到0.5-1微秒。对于GMT测量,这会导致50-100μm的横向位移误差。理想情况下,跟踪器将安装在光学系统的曲率中心,从而将角度灵敏度降至最低。实际上,某些光学元件(包括凸面光学元件和GMT段)无法接近该点,其曲率中心位于该段上方38m处,并位于镜实验室外。该系统的几何结构如图5所示。角α,即视线与表面法向的偏差,是近似为球面镜计算的,
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: