将网格文件导入Fluent中，分别设置五种植物油（棉籽油、棕榈油、蓖麻

Import the grid file into Fluent, and set the parameters of five vegetable oils (cottonseed oil, palm oil, castor oil, soybean oil, peanut oil) as the base oil for trace lubrication. The main parameters are shown in Table 2. In the simulation, both blades a and b were set to 111 degrees Celsius (384k), the milling cutter was rotated at a speed of 1200 rad/min, and the temperature distribution of the workpiece surface was measured when the five kinds of vegetable oil micro-lubrication milling reached a steady state.

The grid file is imported into Fluent, respectively, set five vegetable oil (cottonseed oil, palm oil, castor oil, soybean oil, peanut oil) parameters as the base oil of microlubrication, the main parameters as shown in Table 2, start the energy equation, each set of simulation two blades a and b are set to 111 degrees Celsius (384k), milling cutter at 1200 rad / min speed rotation, respectively, measured five trace lubrication surface distribution.

The grid file is imported into fluent, and the parameters of five kinds of vegetable oils (cottonseed oil, palm oil, castor oil, soybean oil and peanut oil) are set as the base oil for micro lubrication. The main parameters are shown in Table 2. Start the energy equation. The two blades a and B in each group are set at 111 ℃ (384k). The milling cutter rotates at 1200rad / min speed, and the five kinds of vegetable oils are measured respectively The temperature distribution on the workpiece surface is obtained when the mass lubrication milling reaches the steady state.<br>