界面最上方是进程条，显示程序名称，运行步骤的进程，以及剩余时间。界面上

At the top of the interface is the progress bar, which displays the name of the program, the progress of the running step, and the remaining time. <br>At the top of the interface is a schematic diagram of the kit, which will simultaneously display the current running corresponding plate position and real-time temperature. <br> When the program runs to a certain position of the kit, the corresponding position of the schematic diagram will change color, and the remaining positions will remain gray. <br> The temperature of the T1 and T2 positions marked on the instrument will be displayed below the position in real time, and the temperature will be controlled with the program settings. <br>There are buttons for "Stop" and "Pause" in the middle of the interface. <br> Click "Pause/Continue" to interrupt and continue the running of the program. <br> Click "Stop", a stop prompt dialog box will pop up. Click "Cancel", the program continues to run, click "OK", the program returns to the initial position, and the button changes from "Stop" to "Start". Click the "Start" button to re-execute this program. <br>Below the interface is a list of program steps, which details the steps, step names, hole positions, waiting time, mixing time, magnetic attraction time, volume, mixing speed, and temperature of each step program. <br> When running to a certain step, the list row corresponding to that step will change color. <br>When the program is running, the instrument will automatically go to the No. 2 position to load the magnet sleeve. After the program runs, the magnet sleeve will be recovered to the No. 2 slot. <br>After the extraction, the instrument will pop up the UV sterilization prompt. <br> If the extraction is over and UV sterilization is not required, click the "Cancel" button.

At the top of the interface is the process bar, which displays the program name, the process that runs the step, and the time remaining.<br>Above the interface is a kit schematic that shows the currently running corresponding plate level and real-time temperature.<br>When the program runs to a plate level in the kit, the plate level corresponding to the schematic changes color and the remaining plates remain gray.<br>The temperature of the T1 and T2 plates identified on the corresponding instrument will be displayed in real time below the plate level and will be controlled with the program settings.<br>There are "Stop" and "Pause" buttons in the middle of the interface.<br>Click "Pause/Continue" to interrupt and continue the program.<br>Click "Stop" to pop up the stop prompt dialog box. Click Cancel, the program continues to run, click OK, the program runs back to its original position, and the button changes from Stop to Start. Click the "Start" button to re-execute the program.<br>Below the interface is a list of program steps, showing in detail the steps, step names, holes, wait times, mixing times, magnetic suction times, volume, mixing speed, and temperature for each step.<br>When you run to a step, the list row for that step changes color.<br>During the operation of the program, the instrument will automatically go to board 2 to load the magnetic rod sleeve. After the program is run, the magnetic rod sleeve is recycled to board number 2.<br>At the end of the extraction, the instrument will pop up the UV sterilization prompt.<br>If this extraction is over and UV sterilization is not required, click the "Cancel" button.

At the top of the interface is the process bar, which shows the name of the program, the process of running the step, and the remaining time.<br>At the top of the interface is the schematic diagram of the kit, which will synchronously display the corresponding board position and real-time temperature of the current operation.<br>When the program runs to a certain board of the kit, the color of the corresponding board in the schematic diagram will change, and the rest will remain gray.<br>The temperature of T1 and T2 boards marked on the corresponding instrument will be displayed under the board in real time, and the temperature will be controlled with the program setting.<br>There are "stop" and "pause" buttons in the middle of the interface.<br>The program can be interrupted and continued by clicking "pause / continue".<br>Click "stop" to pop up the stop prompt dialog box. Click "Cancel", the program will continue to run, click "OK", the program will return to its original position, and the button will change from "stop" to "start". Click the "start" button to re execute this program.<br>At the bottom of the interface is a list of program steps, which shows the steps, step name, hole position, waiting time, mixing time, magnetic suction time, volume, mixing speed and temperature of each step.<br>When running to a certain step, the color of the list line corresponding to the step will change.<br>During the operation of the program, the instrument will automatically load the magnetic rod sleeve to No. 2 plate. After running the program, the magnetic rod sleeve will be recovered to No. 2 board.<br>After the extraction, the instrument will pop up the UV sterilization prompt.<br>If UV sterilization is not required after the extraction, click the "Cancel" button.<br>