적절한 정밀도와 사이즈 안정성이 있습니다.집게의 구체적인 중요

It has the appropriate precision and size stability. The specific critical surface of the tongs, such as the surface of the positioning element, the surface of the knife or indicator element, and the specific mounting base surface of the tongs, must have an appropriate amount of size and shape, and the appropriate between them. In order to stabilize the dimensions of the collection, the casting house must be specifically aged, and the welding and forged tongs should be specifically degenerated. <br><br>It has high strength and strong stiffness. During processing, the clip must be able to handle relatively large cutting and clip forces. Specifically, it must have sufficient strength and strength to prevent deformation and vibration that is not allowed by the forceps. For this reason, the specific needs of the house must have a certain wall thickness, and casting and welding houses generally use reinforced ribs or concrete frames in situations where the assembly is not affected. <br><br>It has good structure and craftability. The tongs should be convenient to manufacture, assemble and inspect in detail. In the casting house, the flange is mounted on the surface of various parts to reduce the processing area. Make sure to leave enough space between the shaved hair surface and the accessories. It is convenient to assemble and unload concrete structures, and is divided into open structures, semi-open structures, and frame structures. <br><br>The excretion is convenient. If there are a lot of debris in this case, the debris structure should be considered if it is specifically inserted.<br><br>It is stable and reliable on the shelf. The brackets are installed on the shelf, and they are all realized through contact or combination of the assembly surface of the tongs and the corresponding surface. The support surface should be large; the base of the tongs protrudes from the side, so that the assembly surface of the tongs and the contact surface of the worktable are good.

There is a specific important surface of the tongs, for example, the surface of the positioning element, the surface of the knife or indicator element, and the specific installation-based surface of the tongs should have an appropriate amount of size and shape and the appropriate position ing accuracy between them.<br><br>In order to avoid deformation and vibration that does not allow for deformation and vibration, specifically, the concrete need to have a certain wall thickness, castings and welding houses generally use a specific type of frame in situations where installing a reinforced rib or not affecting the assembly accessories.<br><br>Casting house should be convenient for manufacturing, assembling and inspecting specifically.<br><br>It is convenient to excree.<br><br>The center of the tongs should be lower when installing the tongs on the shelf workbench, and the higher the center, the lower the base should be the lower the support.

有适当的精密度和尺寸稳定性，如夹子的具体重要表面，如位置测量元件的表面，刀具或指示元件的表面及夹子的具体安装基础表面等应具有一定的大小和形态，并具有它们之间的适当位置精密度，为了保证房屋的尺寸稳定，铸造房屋具体进行时效处理，焊接和锻造镊子要具体退化处理。<br>强度高，强度强。在临时加工中，夹子要具体承担较大的切削力和剪切力，为了不让具体的夹子产生不允许的变形和震动，需要具体的强度和强度。必须有一定的壁头，铸件和焊接房屋一般设置强化框架或不影响器件组装的情况下，框架式房屋使用具体的。<br>结构工艺性良好，夹子具体应便于制造、装配和检查，主件上具体安装了各种部件的表面，减少了加工面积，削好的体毛表面和零件之间要留有足够的空间，具体的结构形态应组装、组装、组装、检查。为了方便卸货，还分为开放人口组、半人口组、框架人口组等。<br>排泄方便<br>车床稳定可靠，夹架架安装在车床上，都是通过与钳子的组装机面相应的表面接触或配合来实现，夹子安装在车床作业台时，夹子的重心越低，重心越高，支撑面越大，夹子的底面越侧面凸出使钳子的组装机面和机床的接触面变得良好。<br>