加速器自动操作控制。操作加速器必须按先后次序操作，若发生误操作，联锁保

Accelerator automatic operation control. The accelerator must be operated in sequence. If a misoperation occurs, the interlock protection system will take effect immediately. The general control of the accelerator is to reasonably arrange the interlocking protection of each sub-system to make them meet the requirements of the accelerator operation operation specification. When the accelerator is turned on, the next operation will not work until the current operation step has not reached the predetermined requirement. For example, if the equipment needs to be cooled by water, the equipment cannot be started before the water is supplied. Even if the cooling water is cut off for the equipment that is already in operation, except for the equipment to stop running, the operation of all subsequent equipment will also fail. These control procedures are incorporated into the computer control program, which automatically handles all operations of the accelerator from preparation to normal operation.

The accelerator automatically operates the control. The operating accelerator must operate in sequence and the interlock protection system will function immediately in the event of a misoperation. Accelerator total control is to arrange the interlock protection of each sub-system reasonably, so that they meet the requirements of the accelerator operating operating specifications. When the accelerator is turned on, the next action will not work until the current action step has reached the intended requirements. For example: the need for water cooling equipment, without water before the equipment can not be started, even if the equipment in operation, cooling water is broken, in addition to the equipment stopped running, in addition to the operation of all equipment after it also failed. These control procedures are incorporated into the computer control program, which automatically handles all operations of the accelerator from preparation to normal operation.

Accelerator automatic operation control. The accelerator must be operated in sequence. In case of misoperation, the interlock protection system will work immediately. The general control of the accelerator is to arrange the interlocking protection of each subsystem reasonably, so that they can meet the requirements of the accelerator operation specification. When the accelerator is turned on, the next operation will not work until the current operation step meets the predetermined requirements. For example, the equipment that needs to be cooled by water can not be started before water supply. Even if the cooling water is cut off for the equipment already in operation, the operation of the equipment in the future will be invalid except that the equipment stops running. These control procedures are incorporated into the computer control program to automatically handle all operations of the accelerator from preparation to normal operation.<br>