凸轮滑块对材料的要求较多，首先要有一定的弯曲疲劳强度和足够的韧性，能承

Cam sliders have many requirements for materials. First of all, they must have a certain bending fatigue strength and sufficient toughness to withstand a certain torsional load to ensure that the cam slider has no obvious deformation after being stressed during work. The second is that the working surface, especially the cam surface, should have high roughness, medium strength and hardness, and good wear resistance to avoid serious defects such as wear, scratches, and fractures during the work of the cam slider. Then the material must have better wear resistance and better cutting performance during processing. Finally, the cam slider must have accurate dimensions, and the material of the journal part should have moderate flexural strength and torsional load and moderate toughness and wear resistance. Comprehensively compare the strength, toughness, wear resistance, workability and economy of various materials

Cam slider on the material requirements more, first of all, there is a certain degree of bending fatigue strength and sufficient toughness, can withstand a certain twisting load, to ensure that the cam slider in the work after the force without obvious deformation. Secondly, the working surface, especially the cam surface, should have a higher roughness, medium strength and hardness, as well as better wear resistance, to avoid the cam slider in the course of work to produce wear, scratch, break and other serious defects. Then the material must have better wear performance and better machining performance during machining. Finally, the cam slider should have an accurate size, the shaft neck fraction of the material should have a medium bending strength and anti-twisting load and medium toughness and wear resistance. Comprehensive comparison of various materials such as strength, toughness, wear resistance, processing and economics

There are many requirements for the material of the cam slider. First of all, it must have certain bending fatigue strength and enough toughness, be able to bear certain torsion load, and ensure that there is no obvious deformation after the cam slider is stressed in the work. Secondly, the working surface, especially the cam surface, should have high roughness, medium strength and hardness as well as good wear resistance, so as to avoid serious defects such as wear, scratch and fracture in the working process of the cam slider. Then the material must have good wear resistance and machining performance. Finally, the cam slider should have accurate size, and the material of the journal should have medium bending strength, torsional load resistance, medium toughness and wear resistance. Comprehensive comparison of strength, toughness, wear resistance, processability and economy of various materials<br>