Adjusting the brake distance is one of the most common tasks in machine maintenance, so the structure and installation position of the adjusting device during design should be simple, however, the larger the diameter of the brake disc, the so much the better. The diameter of the brake disc d is limited by the diameter of the wheel rim. In general, the diameter d of the brake disc is selected to be between 70% and 79% of the rim diameter. If the total mass of the machine exceeds 2t, the diameter d of the brake disc should take its upper limit. This disc brake is designed for light vehicles. The rim diameter is 16 inches, so the conversion value is 406.4 mm (16 × 23.4 mm), and d is 406.4 × 0.79 = 321 mm.
Adjusting the brake distance is one of the most common tasks in machine maintenance, so the structure and installation position of the adjusting device during design should be simple, however, the larger the diameter of the brake disc, the so much the better. The diameter of the brake disc d is limited by the diameter of the wheel rim. In general, the diameter d of the brake disc is selected to be between 70% and 79% of the rim diameter. If the total mass of the machine exceeds 2t, the diameter d of the brake disc should take its upper limit. This disc brake is designed for light vehicles. The rim diameter is 16 inches, so the conversion value is 406.4 mm (16 × 23.4 mm), and d is 406.4 × 0.79 = 321 mm.
正在翻译中..