该装置主要由五个部分组成：机架、剥离机构、传送机构和果穗分离装置。剥皮

The device is mainly composed of five parts: frame, peeling mechanism, conveying mechanism and ear separating device. The main components of the peeling mechanism are composed of two pairs of peeling rollers, whose function is to make the raw materials enter the drum chamber through the feed port, and the peeling rollers pull out the mixture of the cover layer of the outer skin and the stems and leaves. Relative rotation, friction, squeeze and advance. Corn husks and ears of corn are automatically unloaded from their respective exports. The distance between the peeling rollers is set by the compression spring, so there is no need to constantly adjust the pressure to improve the peeling quality. The motor is installed on the electric seat, and the peeling roller is installed on the bearing seat. The peeling roller is connected to the motor through a belt, and the pulley is connected to the peeling roller through a gear. There are 4 rubber sleeves with protrusions on the peeling roller, and the bearing seats at both ends of the peeling roller are in the same horizontal plane. Can move forward smoothly. During the movement, the ears are pulled down to accomplish the purpose of peeling. The transmission mechanism includes: 1. Electric motor; 2. Pulley; 3. Belt; 4 gears; 5. Bearing seat. Since this device uses solid rubber peeling rollers that mesh with each other, the friction coefficient of the peeling roller is relatively large, so it is impossible to install a presser foot.

The device consists of five parts: a rack, a peeling mechanism, a conveyor and a fruit spike separation device. The main components of the peeling mechanism consist of two pairs of peeling rollers, the role of which is to allow the raw material to enter the drum chamber through the inlet, peeling rollers to pull out the outer skin covering and stem leaf mixture. Relative rotation, friction, extrusion, and forward. Corn shells and corn spikes are automatically unloaded from their respective exports. The distance between the peeling rollers is set by the compression spring, so there is no need to constantly adjust the pressure to improve peeling quality. The motor is mounted on the electric seat and the peeling roller is mounted on the housing. The peeling roller is connected to the motor by belt, the belt wheel is connected to the peeling roller by gear, and there are 4 rubber sleeves with protrusions on the peeling roller, and the housings at both ends of the peeling roller are in the same horizontal surface. Can move forward smoothly. During the exercise, the fruit spike is pulled down to complete the peeling purpose. The drive mechanism includes: 1. Motor; 2. Wheel; 3. Belt; 4 Gears; 5. Housing. Because the device uses a solid rubber peeling roller that engages each other, the friction coefficient of the peeling roller is large, so it is not possible to set the foot.

The device is mainly composed of five parts: frame, stripping mechanism, transmission mechanism and ear separation device. The main part of the peeling mechanism is composed of two pairs of peeling rollers, whose function is to make the raw materials enter the roller chamber through the feed port, and the peeling roller pulls out the mixture of the covering layer of the outer skin and the stem and leaf. Relative rotation, friction, extrusion and advance. Corn husks and ears are automatically unloaded from their respective exports. The distance between the stripping rollers is set by the compression spring, so it is not necessary to adjust the pressure continuously to improve the stripping quality. The motor is installed on the electric seat, and the peeling roller is installed on the bearing seat. The stripping roller is connected with the motor through a belt, and the pulley is connected with the stripping roller through a gear. Four rubber sleeves with protrusions are arranged on the stripping roller, and the bearing seats at both ends of the stripping roller are in the same horizontal plane. It can move forward smoothly. In the process of movement, the ear is pulled down to complete the purpose of stripping. The transmission mechanism includes: 1. Motor; 2. Pulley; 3. Belt; 4. Gear; 5. Bearing seat. Because the device uses solid rubber stripping roller which is meshed with each other, the friction coefficient of stripping roller is large, so the presser foot cannot be set.<br>