After the two ends of the heat shrinkable tape are lined with wood lining, the heat shrinkable tape is uniformly heated in the circumferential direction from the middle, and shrinks to the ends. Heat and shrink to the other end in the same way. (In the process of heating in the circumferential direction, if the fixing sheet is separated from the heat shrinkable belt, tap it while it is hot or roll it with the pressure roller, and the flame must cover the fixing sheet during the heating process). It should be noted that the heat shrinkable tape should be installed in time when the primer is still wet. During the heating process of the heat shrinkable belt, two persons should synchronize in the same direction, and both sides should be in corresponding positions to avoid bubbles.
正在翻译中..