当汽水分离器液位过高出现排水不畅现象时，首先检查压差是否合适，出现此现

When the liquid level of the steam separator is too high and the drainage is not smooth, first check whether the pressure difference is appropriate. This phenomenon is often because the pressure difference requirements are not strictly implemented, which causes the pressure of the lower section to be higher or equal to the pressure of the upper section, resulting in poor drainage. , In this way, the pressure difference is adjusted in time according to the steam supply pressure requirements. If the pressure difference is appropriate, check whether the gauge pressure on the steam-water separator is too low. If it is too low, turn on a little bit to supplement the steam boost to ensure the smooth discharge of the condensate; if the pressure difference is appropriate, the gauge pressure is appropriate, and there is still poor drainage. , Then open the manual drain valve. If the liquid level drops rapidly, it means that the automatic drain system is malfunctioning. At this time, open the manual valve to a suitable position and maintain a certain liquid level, and replace the accessories when the machine stops.

When the liquid level of the steam water separator is too high and the drainage is not smooth, first check whether the differential pressure is appropriate. This phenomenon is often due to the failure to strictly implement the differential pressure requirements, resulting in the pressure of the lower section being higher or lower than that of the upper section, resulting in poor drainage. In this case, the differential pressure shall be adjusted in time according to the steam supply pressure requirements. If the pressure difference is appropriate, check whether the gauge pressure on the steam water separator is too low. If it is too low, slightly open the make-up steam for pressurization to ensure the smooth discharge of condensate; If the pressure difference is appropriate and the gauge pressure is appropriate, and the drainage is still poor, open the manual drainage valve. If the liquid level drops rapidly, it indicates that the automatic drainage system has failed. At this time, open the manual valve to the appropriate position and maintain a certain liquid level. Replace the accessories when stopping the machine.

When the liquid level of the steam-water separator is too high, the poor drainage occurs. First, check whether the pressure difference is appropriate. This phenomenon often occurs because the pressure difference requirement is not strictly implemented, which causes the pressure in the lower section to be higher than or equal to the pressure in the upper section, resulting in poor drainage. Therefore, adjust the pressure difference in time according to the steam supply pressure requirement. If the pressure difference is appropriate, check whether the gauge pressure on the steam-water separator is too low; if it is too low, slightly open the supplementary steam to boost pressure to ensure the smooth discharge of condensed water; If the pressure difference is appropriate and the gauge pressure is appropriate, and the drainage is still poor, open the manual drainage valve. If the liquid level drops rapidly, it means that the automatic drainage system is out of order. At this time, open the manual valve to a proper position and keep a certain liquid level, and replace the accessories when stopping the machine.