前围配电盒线束扎带在驾驶室翻转后出现松动/松脱线束过孔塑胶支架较软，支

The wiring harness ties of the front wall power distribution box become loose/loosed after the cab is turned <br>over. The plastic bracket is soft. The bracket is deformed by the tensile force of the wiring harness during the turning of the cab, causing the tie to fall off. The <br>production line is tied in place as required ; The static debugging line shall be re-inspected after the cab is turned over. <br>Feedback design optimizes the limit structure at the strap of the bracket

The front perimeter distribution box harness strap shone/loose after the cab is flipped.<br>The wire harness through the hole plastic bracket is soft, the bracket in the cab flip process by the harness tensile force caused deformation, resulting in the tie off.<br>The production line is strapped in place as required, and the static debug line is re-examined after the cab is flipped.<br>Feedback design optimizes the limit structure at the bracket pull belt.

The wiring harness of the front wall power distribution box is loose / loose after the cab is turned over<br>The plastic bracket of wire harness through hole is soft, and the bracket is deformed by the stretching force of wire harness during cab turning, which causes the tie strip to fall off<br>The production line shall be bundled in place as required; the static commissioning line shall be rechecked after the cab is turned over.<br>Feedback design and optimization of the limiting structure of the bracket tension band<br>