调漆：油漆加入稀料，油漆粘度调整至22-24s。添加固化剂，原漆：固化

Paint mixing: Add thinner to the paint, adjust the paint viscosity to 22-24s. <br>Add curing agent, original paint: curing agent = 4:1. <br>To paint the body of the vehicle, spray over 40um. After spraying, use a baking lamp to <br>bake the paint. The thickness of the paint film after baking for 8 to 10 minutes should be uniform and consistent. The thickness of the paint film should be at least 40 μm. The appearance of the paint film is smooth and smooth, without obvious particles, shrinkage, color difference and orange peel. defect

Toghes: Paint added to the material, paint viscosity adjusted to 22-24s.<br>Add curing agent, original paint: curing agent: 4:1.<br>The body of the whole vehicle to paint, need to spray more than 40um. Baking the paint with a baking lamp after spraying 8 to 10min<br>After baking, the thickness of the paint film requires uniform consistency, the film thickness of at least 40 m, the appearance of the paint film is smooth, flat, no obvious particles, shrink holes, color difference and orange peel and other defects

Paint mixing: add thinner to the paint, and adjust the viscosity of the paint to 22-24s.<br>Add curing agent, original paint: curing agent = 4:1.<br>The painting of the whole vehicle body shall be more than 40um. Bake the paint with baking lamp for 8-10min after spraying<br>The color film thickness after baking shall be uniform, and the film thickness shall be at least 40 μ M. the appearance of the film shall be smooth and flat, and there shall be no obvious particle, shrinkage cavity, color difference, orange peel and other defects<br>