在注塑成形过程中，模具的温度直接影响模具的质量和塑件的成型质量和生产效

In the injection molding process, the temperature of the mold directly affects the quality of the mold and the molding quality and production efficiency of the plastic parts. According to the requirements of plastics, the temperature of the raw materials injected into the mold is about 2000C, and the temperature of the plastic parts taken out of the mold is about At 600C, the reason for the temperature drop is that cooling water is passed into the mold, which lowers the temperature. Normally, the mold is cooled with normal temperature water. Sometimes the temperature of the mold can be adjusted by adjusting the flow of water. <br>The material used in the CD box is polypropylene (PP). It requires a higher mold temperature. If the mold temperature is too low, it will affect the fluidity of the plastic, increase the shear resistance, make the internal stress of the plastic part greater, and even appear cold flow marks, silver wire, and cannot be filled. defect. Therefore, hot water or mold should be heated at the beginning of injection to prevent insufficient filling. <br>In short, in order to obtain high-quality and high-efficiency production, the temperature of the mold must be adjusted.

In the injection molding process, the temperature of the mold directly affects the quality of the mold and the molding quality and production efficiency of the mold, according to the requirements of the plastic, the raw material temperature injected into the mold is about 2000C, and the temperature of the mold removed from the mold is about 600C, the temperature drop is due to the cooling water into the mold, resulting in a decrease in temperature, usually the mold cooling with regular warm water can be. Sometimes the temperature of the mold can be adjusted by regulating the flow of water.<br>The material used in the CD box is polypropylene (PP). It needs a higher mold temperature, if the mold temperature is too low will affect the fluidity of the plastic, increase shear resistance, so that the internal stress of the plastic parts is greater, and even there will be cold flow marks, silver wire, can not be filled and other defects. Therefore, heat hot water or mold at the beginning of the injection to prevent underfilling.<br>In short, in order to achieve high quality and efficient production, the mold must be temperature-regulated.

In the process of injection molding, the temperature of the mold directly affects the quality of the mold and the molding quality and production efficiency of the plastic parts. According to the requirements of the plastic, the temperature of the raw materials injected into the mold is about 2000c, while the temperature of the plastic parts taken out of the mold is about 600C. The reason for the temperature drop is that the cooling water is introduced into the mold, resulting in the temperature drop. Generally, the cooling water of the mold is normal temperature water, i.e Yes. Sometimes the mold temperature can be adjusted by adjusting the water flow<br>The material used in the CD case is polypropylene (PP). It needs a higher mold temperature. If the mold temperature is too low, it will affect the fluidity of the plastic, increase the shear resistance, make the internal stress of the plastic parts larger, and even have defects such as cold flow mark, silver wire, unable to fill and so on. So heat the hot water or mold at the beginning of the injection to prevent inadequate filling.<br>In short, in order to obtain high quality and high efficiency production, it is necessary to adjust the temperature of the mold.