方脉脉冲下面的绞龙和关风器 ，每天上班前需第一个打开，让它先工作10分

The screw auger and the wind shutoff under the square pulse pulse should be turned on first before going to work every day. Let it work for 10 minutes and then turn on the fan and the controller on the pulse to let the solenoid valve work. The last one should be closed every time after get off work. This can ensure that the ash in the accumulated auger is discharged in time every day and will not accumulate in it. If there is too much ash inside, it must be cleaned regularly to prevent the auger from jamming and the fan to be blocked!

The strands and wind shutters below the pulse, every day before going to work need to be the first to open, let it work for 10 minutes before opening the fan and pulse control instrument to let the solenoid valve work, each time after work to the last off the hangers and wind shutters, so as to ensure that the ash in the hangers in time to drain, will not accumulate in it, such as too much gray inside, to clean up regularly, to prevent the hangers stuck, wind turbine blocking!

The winch and air shut-off device under the square pulse need to be turned on first before going to work every day. Let it work for 10 minutes first, and then turn on the fan and the controller on the pulse to let it work Solenoid valve work, every time after work to the last turn off the next winch and fan, so as to ensure that the ash in the winch is discharged in time every day, will not accumulate in it, such as the ash inside too much, to regularly clean up, to prevent the winch stuck, turn off the fan blocked!