1、车门分装时，发现问题未及时返修，而是员工用手向上推住玻璃，使玻璃上

1, the door packing, the problem found not timely repair, but he pushed employees live up glass, glass increases to a vertex offline, final inspection during inspection glass rose again found not normally fall to the vertex of the lift; <br>2 , online analysis showed the mounting of the door glass when the guard plate assembly easily guide the upper glass seal crimp pressing in the rail, resulting in an interference seal with the glass of the glass can not rise to a normal apex.

1, the door is divided, found that the problem is not timely repair, but the staff pushed up the glass by hand, so that the glass rose to the top of the line, the final inspection process check the glass lift found that the fall can not rise to the apex again normal;<br>2, on-line analysis found that the installation of the door inner guard assembly when the glass easy to the upper glass rail seal squeeze curled in the rail, resulting in sealing strip and glass interference so that the glass can not rise normally to the apex.

1. When the door is repacked separately, if any problem is found, it is not repaired in time. Instead, the employee pushes the glass up by hand, so that the glass can rise to the top and then go offline. During the final inspection, it is found that the glass can not rise to the top again after falling;<br>2. Through online analysis, it is found that when installing the door inner guard board assembly, the glass is easy to squeeze and crimp the sealing strip of the upper glass guide rail in the guide rail, resulting in the interference between the sealing strip and the glass, so that the glass cannot rise to the top normally.<br>