4月26日针对此问题成立转向改进团队，对此问题展开4M分析，并制定了一

In response to this problem, a shift improvement team was set up on April 26, 4M analysis was carried out on this problem, and the following temporary measures were formulated; <br>1. The on-site assembly employees of the A / B class have all been trained in the process, master the assembly operation instructions, and work through the operation Observe the operation requirements; <br>2. The site is equipped with a dusting rag and pressing roller, combined with the operation guide content, and the site verification meets the design and process requirements; <br>3. After on-site operation observation and offline assembly test, Guizhou Hongyang-A2100 sealing strip If the technical conditions for on-site assembly are not met, the supply will be suspended / immediate rectification; <br>4. The final assembly will issue a new version of the operating instructions and conduct the primer adhesion test; <br>5. Accelerate the supply system of the wiper fixing cover and sealing strip assembly Process approval.

On April 26th a turn-to-improvement team was set up to conduct a 4M analysis of the issue and a temporary measure was developed;<br>1, A/B class on-site assembly staff have been process training, the assembly work instructions are proficient, after job observation to meet the operating requirements;<br>2, the site is equipped with a plaster rag and press rollers, combined with the operation of the operating instructions, on-site verification in line with the design and process requirements;<br>3, after on-site work observation and offline assembly test, Guizhou Red Yang-A2100 seal does not meet the technical conditions of on-site assembly, suspension of supply / immediate rectification;<br>4, the general assembly issued a new version of the operation guidance document, and the bottom coating adhesive bonding test;<br>5, accelerate the promotion of wiper fixed cover and sealing strip supply system process approval.

On April 26, an improvement team was set up to analyze the problem, and some temporary measures were made;<br>1. The on-site assembly workers of class A / B have received process training, mastered the assembly operation instructions skillfully, and met the operation requirements through operation observation;<br>2. The site shall be equipped with a dusting cloth and a pressing roller, which shall be operated in combination with the contents of the operation instruction, and the site verification shall meet the design and process requirements;<br>3. According to the field operation observation and offline assembly test, Guizhou hongyang-a2100 sealing strip does not meet the site assembly technical conditions, so the supply is suspended / rectification is required immediately;<br>4. The new version of operation instruction document shall be issued to the general assembly, and the adhesion test of primer shall be carried out;<br>5. Accelerate the approval of supply system process of wiper fixed cover plate and sealing strip.