1.请提供搅拌器AG-303a上封头支撑法兰及筒节厚度，支撑筋板尺寸；

1. Provide support flange and the cylinder head section thickness stirrer AG-303a, the support rib dimension; please provide size in CAD. <br>2.1CN spout measured phase difference between the weld and the CAD drawing on 50mm, which is inclined close proximity to the weld spout, the spout can be 1CN then moved downward 50mm ~ 100mm, to avoid weld? <br>3. The role of manhole baffle? <br>Head support 4. insufficiency barrel size (plate size and the large arc-like 2 three sheet width and thickness of the vertical standpipe in size AA); please provide size in CAD. <br>5. What Will 10N nozzle role? In the form of internal or external screw thread form forms? <br>6. Domestic support to calculate the diameter of the center leg 2140mm (see Annex), and foundation site 2630mm diameter larger difference? We can give advice.

1. Please provide the mixer AG-303a top seal support flange and barrel section thickness, support the size of the rib plate;<br>2.1CN tube port in CAD drawings to measure the difference between it and the weld 50mm, it is the slope dwelling and weld distance is closer, can 1CN pipe port down another 50mm to 100mm, to avoid welding?<br>3. The role of the human hole bezel?<br>4. The size of the lower cap support piece in the barrel body is incomplete (A-A arc plate size and large sample 2 in the width and thickness of the three standplate, vertical tube size);<br>5. What is the function of the 10N nozzle? Is it in the form of an internal thread or an external thread?<br>6. According to the domestic support calculated the leg center diameter of 2140mm (see annex), and the site 2630mm diameter of the base value is a big difference? Can you give you advice?

1. Please provide the thickness of the upper head support flange and barrel section of the agitator ag-303a, the size of the support rib plate; can you provide the size in CAD.<br>2. The difference between 1cn nozzle and weld is 50mm measured on CAD drawing. It is the distance between inclined nozzle and weld is relatively close. Can 1cn nozzle be moved down another 50mm ~ 100mm to avoid weld?<br>3. What is the function of manhole baffle?<br>4. The size of the supporting parts of the lower head in the cylinder body is incomplete (the size of arc plate in A-A, the width and thickness of the three vertical plates in detail 2, and the size of the vertical pipe); can the size be provided in CAD.<br>5. What is the function of 10N nozzle? Is it in the form of internal thread or external thread?<br>6. According to the calculation of domestic bearing, the center diameter of outrigger is 2140mm (see the attachment), which is quite different from the foundation value of 2630mm diameter on site? Can you give me some suggestions.<br>