Reviewed the A4000170 today. Below are my observations:1. Unit construction is very stable. There is no movement between the base and pedestal, and the top panel, before and after the drop test.2. spacing of mirror panels are not consistent. spacing is between 0 to 3mm3. The weight of the unit is causing the MDF pallet to sag.The unit was drop tested using SIOC Type C . 1. The carton was busted open during one of the edge drops. Possible cause is the 3mm MDF panel slicing through the carton.2. Pallet broke during corner drop3. Mirror panels were broken on multiple locations