WT-3 线槽切割机使用和保养须知1） 拔出安全插销 抬起手柄，调整好

Instructions for use and maintenance of WT-3 wire groove cutting machine <br>1) Pull out the safety pin and raise the handle, adjust the length of the wire groove to be cut, and the cutter cuts in from the slit piece of the wire groove. <br>2) When cutting the wire groove, push the wire groove from the outside to the inside along the cutting surface of the wire groove cutting machine from the opening of the wire groove, and push the wire groove to the root of the cutter as much as possible. This will not only ensure the easy cutting of the wire groove, but also ensure cutting The surface is smooth, without burrs, and the cut surface is not deformed. <br>3) When cutting, try to choose a relatively flat work site, so as to ensure that the bottom plate of the cutting machine is stable during cutting, and at the same time, it can also reduce the cutting pressure on the cutter of the cutting machine. <br>4) Please add engine oil to the lower working surface of the blade and the cutting tool for lubrication and anti-rust treatment. <br>5) Add engine oil to the cam working surface to lubricate the internal cavity. <br>6) Maintain at least once a week.

What to know about the use and maintenance of the WT-3 wire slot cutter<br>1) Pull out the safety pin Lift handle, adjust the length of the required cut line groove, the tool from the line slot gap slice cut.<br>2) When cutting the line groove, from the line groove opening along the groove cutting machine cutting machine cutting surface from the outside into the line groove, as far as possible to push the line groove to the root of the tool, so as to not only ensure that the line groove cutting easy, but also to ensure that the cutting surface is flat, no burrs, cut the face does not deform.<br>3) When cutting as far as possible to choose a relatively flat work site, so as to ensure that the cutting machine bottom plate is stable, but also to reduce the cutting machine cutter cutting pressure.<br>4) Please add oil to the work surface under the blade and tool with cutting for lubrication and anti-rust treatment<br>5) Fill the cam work surface with oil to lubricate the internal cavity.<br>6) Maintain at least once a week.

Instructions for use and maintenance of WT-3 slot cutter<br>1) Pull out the safety bolt, lift the handle, adjust the length of the slot to be cut, and cut the tool from the slot.<br>2) When cutting the slot, push the slot from the outside to the inside along the slot cutter face at the slot opening, and push the slot to the root of the tool as far as possible, which can not only ensure that the slot cutting is easy, but also ensure that the cutting surface is smooth, burr free, and the cutting section is not deformed.<br>3) When cutting, try to choose a relatively flat work site, which can ensure that the cutting machine floor force is stable, but also can reduce the cutting pressure of the cutting machine tool.<br>4) Please add oil to the lower working face of the blade and cutter for lubrication and rust prevention<br>5) Add machine oil to the cam face to lubricate the inner cavity.<br>6) Maintain at least once a week.<br>