当我发现信息没有导入Aurora将ECN退回重新关闭，apadter有

当我发现信息没有导入Aurora将ECN退回重新关闭，apadter有时候未必能正常运行。通常我会把这些ECNs中加入你，等待你重新导入关闭。但是收到的readouts有时候信息不全，这就导致有些ECNs没有成功导入aurora系统却依然关闭了。我们是否在关闭ECNs的时候，去Aurora系统检查一下信息是否更新？最起码在新的Adapter生效前，这是一个确保agile信息导入Aurora系统的有效行为。这个操作我也试过，但是adapter偶尔失灵。在adapter运行失败的情况下，我都会把ECN留给你处理

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

When I found that the information was not imported into Aurora, I returned the ECN and closed it again. Sometimes the apadter may not be able to run normally. Usually I would add these ECNs to you and wait for you to re-import off. However, the received readouts sometimes have incomplete information, which caused some ECNs to fail to be successfully imported into the aurora system but were still closed. Do we go to the Aurora system to check whether the information is updated when ECNs are turned off? At least before the new Adapter takes effect, this is an effective behavior to ensure that agile information is imported into the Aurora system. I also tried this operation, but the adapter fails occasionally. In case the adapter fails, I will leave the ECN to you

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

When I found out that the information was not imported into Aurora, ECN was returned and closed again, and sometimes the adapter may not function properly. Usually, I will add these ECNs to you and wait for you to re import and close them. However, sometimes the received readouts have incomplete information, which leads to some ECNs not successfully importing into the aurora system but still shutting down. Do we go to the Aurora system to check if the information is updated when we close ECNs? At least until the new adapter takes effect, this is an effective behavior to ensure that agile information is imported into the Aurora system. I have also tried this operation, but the adapter occasionally malfunctions. In case the adapter fails to run, I will leave the ECN for you to handle

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

When I found that the information was not imported into Aurora, I returned ECN and closed it again. Sometimes apadter may not work normally. Usually I will add these ECNs to you and wait for you to re-import them and close them. However, the received readouts sometimes have incomplete information, which leads to some ECNs not successfully imported into aurora system but still closed. When we shut down ECNs, should we go to Aurora to check whether the information is updated? At least before the new Adapter takes effect, this is an effective behavior to ensure that agile information is imported into Aurora system. I've tried this operation, but the adapter occasionally fails. I will leave ECN to you when the adapter fails to run.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.