现场煤气放散阀与煤气进出口接口按图安装成形。阀后放散装置中的吊环、钢索

The on-site gas relief valve and the gas inlet and outlet interface are installed and formed according to the drawing. The lifting rings, steel cables and other components in the relief device behind the valve are installed on site. The lifting ring is welded to the top cover of the equipment and the gas connection. When installing the wire rope and other related tightening fixtures, ensure that the angle between the vertical relief pipe and the wire rope is not less than 45 degrees. When installing the relief valve, the operating handle must face the operating platform.

The on-site gas release valve and gas inlet and outlet interface shall be installed and formed according to the drawing. The lifting rings, steel cables and other components in the rear valve release device shall be installed on site. The lifting ring shall be welded with the equipment top cover plate and gas interface. When installing wire rope and other relevant tensioning and fixing devices, it shall ensure that the included angle between the vertical release pipe and the wire rope is not less than 45 degrees. When installing the release valve, the operating handle shall be facing the operating platform.

On-site gas relief valve and gas inlet and outlet interface are installed and formed according to the drawing. On-site installation of rings, steel cables and other components in the rear valve relief device. When welding with the top cover plate of the equipment and the gas interface, the angle between the vertical discharge pipe and the steel wire rope should be not less than 45 degrees when installing the steel wire rope and other related tightening and fixing devices, and the operating handle should face the operating platform when installing the discharge valve.