3.设备组成以及结构特点 3.1 设备结构特点  工件经过翻滚以及对

3. Equipment composition and structural characteristics <br>3.1 Equipment structural characteristics <br> The workpiece is tumbling and impacted on the hopper and mesh belt surface to complete the purpose of oil draining. The oil droplets that cannot fall into the oil return pan through gravity are blown into the oil return pan by the dryer. Lift the baffle and weld a round steel bar with a diameter of 5mm to prevent the cleaning fluid from flowing out when the tubular workpiece is close to the baffle. <br>3.2 Equipment composition <br>(1) Bottom frame and oil return pan: Welded from 6mm/Q235 steel plate and section steel. <br>(2) Hoist

3. Equipment composition and structural characteristics<br>3.1 Equipment structural characteristics<br>The workpiece is subjected to rolling and impact on the hopper and mesh surface to achieve the purpose of oil drainage. Oil droplets that cannot fall into the return oil pan under the action of gravity are blown into the return oil pan by a drying fan. Lift the baffle and weld a 5mm diameter round steel bar to prevent the cleaning fluid from flowing out when the tubular workpiece is tightly attached to the baffle.<br>3.2 Equipment composition<br>(1) Underframe and oil return tray: welded from 6mm/Q235 steel plate and profile steel.<br>(2) Elevato

3. Equipment composition and structural characteristics<br> 3.1 Structural characteristics of equipment<br> The workpiece is rolled and impacted on the hopper and mesh belt surface to achieve the purpose of oil drainage. Oil drops that cannot fall into the oil return pan under the action of gravity are blown into the oil return pan by a blow-drying fan. The lifting baffle is welded with a round steel bar with a diameter of 5mm, so as to prevent the cleaning liquid from flowing out when the tubular workpiece is close to the baffle.<br> 3.2 Equipment composition<br> (1) Underframe and oil return pan: 6mm/Q235 steel plate and section steel are welded.<br> (2) Hoist