将侧标志灯/侧转向灯/示廓灯不亮问题纳入综合质量门进行控制，南广场确认

The problem that the side signs/side turn signals/signal lights are not turned on is included in the comprehensive quality gate for control, and the South Square confirms the repair status. <br>Temporary inspection standards are formed according to the way of dropping, and the inspectors are trained to focus on controlling the dropping phenomenon. Statistics the failure rate. <br>In response to the problem of abnormal sound of door opening and closing, it is required to feedback the fault point video to the improvement group to <br>organize external inspection, procurement, and R&D to evaluate together according to the supplier, and improve according to the evaluation situation. <br>Remove the entire set of faulty and non-faulty parts of the faulty car Contrast check and <br>pull the designer to confirm the problem, such as increasing the torque value can eliminate the problem, it is recommended to write a contact form to request the design to change the torque requirements. <br>Re-receipt the project and issue an improvement plan by next Tuesday. <br>Organize the general assembly and quality personnel to conduct trial assembly review according to the trial assembly plan, and issue a change order after the verification measures are qualified. <br>Re-evaluate the problem of abnormal noise at the junction after the car, and issue an improvement plan to <br>implement the second trial installation time, and organize relevant personnel to conduct a trial installation review <br>technology to determine whether the film needs to be distinguished between winter and summer. If necessary, Clarify the difference between the two states and whether there is a difference in adhesive strength. <br>Provide an upgrade report for <br>procurement , and upgrade the problem. Procurement Department organizes relevant units to conduct a sample review of the film.

你已超过允许的翻译次数。请稍后再试。

The problem that the side marker lamp / side turn signal lamp / position light is not on will be brought into the comprehensive quality gate for control, and the South Square will confirm the repair status.<br>The temporary inspection standard is formed according to the falling off mode, and the inspectors are trained to control the shedding phenomenon. The falling failure rate was counted.<br>To solve the problem of abnormal sound when the door is opened and closed, it is required to take video of the fault point and feed it back to the improvement group<br>Organize external inspection, procurement, R & D together to evaluate the supplier, and improve according to the evaluation<br>The whole set of fault parts and non fault parts are compared and checked<br>Pull the designer to confirm the problem. If the problem can be eliminated by increasing the torque value, it is suggested to write a contact list to require the design to change the torque requirements.<br>For the project re receipt, and issued the improvement plan before next Tuesday.<br>Organize the general assembly and quality personnel to carry out trial assembly review according to the trial assembly plan, and issue the change order after the verification measures are qualified.<br>The abnormal noise at the lap joint after landing is reevaluated and the improvement scheme is provided<br>Implement the second trial assembly time, and organize relevant personnel to carry out trial assembly review<br>Technology to determine whether the film needs to distinguish between winter and summer, if necessary, the difference between the two states and whether there is difference in adhesion force<br>Upgrade the purchase issue and provide upgrade report<br>The purchasing department shall organize relevant units to review the sealing sample of the film