在拆卸变速器总成时，由于我忘记拆卸节气门处电缆上端的固定端子，导致在变

When disassembling the transmission assembly, because I forgot to disassemble the fixed terminal at the upper end of the cable at the throttle, the riveting terminal of the cable was disconnected when the transmission was lifted. Therefore, pay special attention to various connectors, especially various oil pipes, water pipes, vacuum tubes, tie rods, pull wires, wires, etc., to avoid unnecessary trouble. This similar failure has two hidden features. Since the outer end of the cable sleeve is also provided with a rubber sleeve protective cover, it is difficult to detect after damage. Due to the function of the cable limit block, it is invalid to disconnect the cable connection at the throttle crank with general inspection and adjustment methods.

When removing the transmission assembly, the riveting terminals of the cable were disconnected when the transmission was lifted because I forgot to remove the fixed terminals at the upper end of the cable at the throttle. Therefore, special attention should be paid to all kinds of connections, especially all kinds of tringes, water pipes, vacuum pipes, levers, cables, wire, etc., to avoid unnecessary trouble. This similar fault has two hidden features. Since the outer end of the cable sleeve also has a rubber sleeve, it is difficult to detect damage. Due to the effect of the cable limit block, it is not effective to disconnect the cable connection at the crank of the throttle valve by general inspection and adjustment means

在拆卸变速器总成时，由于我忘记拆卸节气门处电缆上端的固定端子，导致在变速器起吊时电缆的铆接端子断开。因此，要特别注意各种连接件，特别是各种油管、水管、真空管、拉杆、拉线、线材等，避免不必要的麻烦。此类似的故障有两个隐藏的特征。由于电缆套的外端还设有橡胶套保护套，损坏后很难检测。由于电缆限位块的作用，用一般的检查和调整手段将节流阀曲柄处的电缆连接断开是无效的<br>