1、取雨刷固定盖板放置在工作台上，检验零部件标表面不能有磕碰、划伤等缺

1、取雨刷固定盖板放置在工作台上，检验零部件标表面不能有磕碰、划伤等缺陷；2、用干净的抹布擦拭雨刷固定盖板密封条粘贴部位，不得有灰尘及颗粒存在，抹布单班更换一次，抹布脏污严重时应及时更换；3.、取雨刷盖板密封条总成，检验密封条总成表面无破损，3M胶隔离纸与3M胶贴实，不能有气泡、脱离等现象；4、将雨刷盖板密封条总成放置在雨刷固定盖板粘贴部位上；5、以雨刷固定盖板下侧凸台为定位基准粘贴密封条总成，粘贴过程中边撕取隔离胶条边粘贴；6、雨刷盖板密封条总成粘贴完成后使用滚轮压实，无雨刷固定盖板粘贴良好不能脱落；

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

1. Take the wiper fixing cover and place it on the workbench. Check that there are no defects such as bumps and scratches on the surface of the parts; 2. Use a clean cloth to wipe the place where the wiper fixing cover sealing strip is pasted. There must be no dust or particles. The rag is replaced once in a single shift, and it should be replaced in a timely manner when the rag is seriously dirty; 3. Take the wiper cover seal strip assembly and check that the surface of the seal strip assembly is not damaged. The 3M adhesive isolation paper and 3M adhesive are firm and must not have bubbles, Phenomenon such as detachment; 4. Place the wiper cover seal assembly on the attachment part of the wiper fixed cover; 5. Use the lower boss of the wiper cover as the positioning reference to paste the seal assembly, tear off during the paste process Isolate the edge of the isolation strip; 6. After the wiper cover plate seal strip assembly is pasted, use a roller to compact it, and the cover plate without the wiper fixing is well pasted and cannot fall off;

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

1、取雨刷固定盖板放置在工作台上，检验零部件标表面不能有磕碰、划伤等缺陷； 2、用干净的抹布擦拭雨刷固定盖板密封条粘贴部位，不得有灰尘及颗粒存在，抹布单班更换一次，抹布脏污严重时应及时更换； 3.、取雨刷盖板密封条总成，检验密封条总成表面无破损，3M胶隔离纸与3M胶贴实，不能有气泡、脱离等现象； 4、将雨刷盖板密封条总成放置在雨刷固定盖板粘贴部位上； 5、以雨刷固定盖板下侧凸台为定位基准粘贴密封条总成，粘贴过程中边撕取隔离胶条边粘贴； 6、雨刷盖板密封条总成粘贴完成后使用滚轮压实，无雨刷固定盖板粘贴良好不能脱落；

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

1. Take the fixed cover plate of the wiper and place it on the workbench, and check whether the surface of the parts and components is free of bumps, scratches and other defects; 2. Wipe the sealing strip of the fixed cover plate of the wiper with a clean rag, and there shall be no dust and particles. The rag shall be replaced in a single shift, and the rag shall be replaced in time in case of serious dirt; 3. Take the sealing strip assembly of the wiper cover plate, and check that the surface of the sealing strip assembly is not damaged. The 3M adhesive isolation paper is firmly pasted with 3M adhesive, and there is no bubble or separation; 4. Place the sealing strip assembly of the wiper cover plate on the sticking part of the wiper fixed cover plate; 5. Stick on the sealing strip assembly with the boss under the wiper fixed cover plate as the positioning reference, and tear off the isolation strip while sticking; 6. After the sealing strip assembly of the wiper cover plate is pasted, use the roller to compact. The fixed cover plate without the wiper is pasted well and cannot fall off;

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.