8) 做这个标定时，我们需要使用专用的标定纸，这个前期调试我们也可以一

8) When doing this calibration, we need to use a special calibration paper, and we can also use one roll for this preliminary debugging. The flatness of the paste is required. Under normal circumstances, it is sufficient to paste it on the surface of the material without blistering. You can find a copper foil with the same thickness as the material (the thickness of the paper is negligible) for the calibration paper.

8) To do this calibration time, we need to use a special calibration paper, this pre-commissioning we can also roll. Paste flatness is required, under normal circumstances pasted to the material plane on the non-foaming state on it, you can find a same thickness as the material (paper thickness can be negligible) copper foil dedicated to paste calibration paper.

8) To do this calibration, we need to use special calibration paper. We can also use a roll of this preliminary debugging. The smoothness of the paste is required. Under normal circumstances, it is OK to stick it to the material plane without blistering. You can find a copper foil with the same thickness as the material (the paper thickness can be ignored) for pasting the calibration paper.<BR>