1.HW mate 30 项目三摄直通率瓶颈岗位优化改善，项目垂直立上

1. In the HW mate 30 project, the three-shot through rate bottleneck positions are optimized and improved. The project is erected vertically, and the through rate of bottleneck positions is increased from 75% to 92%, and the total through rate reaches 94%; for <br>example, the three-position MMI through rate is only 64%. The sub-photograph (OIS photo) is 30cm upward and the curve fitting fails. It is necessary to re-correct and burn each position code, which affects the efficiency, so as to compensate in the three-position laser station. Through the observation of CPK data, the upward compensation is 10um, and the straight-through rate is increased to 94%;

1.HW mate 30 project three-camera pass-through bottleneck job optimization and improvement, the project vertical stand- and bottleneck post pass-through rate increased from 75% to 92%, total pass-through rate reached 94%;<br>Example: three posture MMI pass-through rate is only 64%, the vice camera (OIS photo) up 30cm and curve fitting failure is not good, need to correct the burning record each position code, affect efficiency, so as to compensate in the three posture laser station, through CCPK data observation, upward compensation 10um, pass-through rate increased to 94%;

1. HW mate 30 project has been optimized and improved in three aspects: first, through rate of bottleneck posts has been increased from 75% to 92%, and total through rate has reached 94%;<br>For example: the pass through rate of MMI in three postures is only 64%, and the auxiliary photography (OIS) is 30cm upward and the curve fitting is not good, it is necessary to correct and record the codes of each position again to affect the efficiency, so as to compensate in the three position laser station. Through the CPK data observation, the upward compensation is 10um, and the through rate is increased to 94%;<br>