1.冷料穴位置（Cavity Layout）的考虑 1）尽量采用平衡式

1.冷料穴位置（Cavity Layout）的考虑 1）尽量采用平衡式布置（BalancesLayout）原则； 2）料穴布置与浇口开设力求对称，为了防止模具受力不均产生偏载，导致发生撑模溢料的问题； 3）料穴布置尽可能紧凑，以缩小模具尺寸。4）型腔和浇口的排列要尽可能地减少模具外形尺寸。5）一模多腔的情况下，要能够使进入每一个型腔的熔料同时到达，而且每个型腔入口的压力应该相等，同时尽可能做到同步填充。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

1. Consideration of Cavity Layout 1) Balance principle should be adopted as much as possible; 2) The layout of the cavity and the opening of the gate should be symmetrical, in order to prevent the uneven load of the mold from generating unbalanced loads, resulting in bracing The problem of mold overflow; 3) The cavity layout is as compact as possible to reduce the size of the mold. 4) The arrangement of the cavity and the gate should reduce the external dimensions of the mold as much as possible. 5) In the case of one mold with multiple cavities, the molten material entering each cavity should be reached at the same time, and the pressure at the entrance of each cavity should be equal, and at the same time, the filling should be synchronized as much as possible.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

1. Consideration of the location of the cold cave (Cavity Layout) 1) Try to adopt the balance layout principle; 2) The cave arrangement and gate opening strive for symmetry, in order to prevent the mold uneven force to produce a partial load, resulting in the problem of supporting mold spills; 3) The cavitation arrangement is as compact as possible to reduce the mold size. 4) The arrangement of the cavity and gate should reduce the mold shape as much as possible. 5) In the case of a multi-cavity, it is necessary to be able to reach the melt into each cavity at the same time, and the pressure of each cavity inlet should be equal, while simultaneousfilling is as far as possible.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

1. Consideration of cavity layout 1） Try to adopt the principle of BalancesLayout; 2) In order to prevent the unbalanced load of the die, the problem of overflow of the supporting die will occur; 3) The cavity arrangement should be as compact as possible to reduce the die size. 4) The arrangement of cavity and gate should reduce the overall dimension of die as much as possible. 5) in the first mock exam, it is necessary to make the melt entering each cavity arrive at the same time, and the pressure of each cavity entrance should be equal, and simultaneously fill as much as possible.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.