⑴立即修订《压铸作业指导书》，从源头改变周转方式来改善发霉现象 ⑵立即

⑴ Immediately revise the "Die-casting Operation Guide" to change the turnover method from the source to improve the moldy phenomenon. <br>⑵ Immediately revise the "510-0033 Packaging Operation Guide". Check the appearance and eliminate moldy products. <br>(3) Use dehumidifier to control temperature and humidity for packaging/finished product warehouse and packaging material warehouse. <br>Re-training the staff on the job of missing shaving burrs;

(1) Immediately revise the "die-casting operation guide" from the source to change the way of turnover to improve mold phenomenon <br>(2) Immediately revise the "510-0033 packaging operation guide", packaging products each layer using foaming cotton isolation so that the product does not directly contact with the product, the appearance of the full inspection, the elimination of moldy products.<br>(3) For packaging / finished warehouse and package warehouse using dehumidifier control on the temperature and humidity inspection.<br>The problem of leakage and scraping spurs retrains the post personnel;

(1) immediately revise the die casting operation instruction to change the turnover mode from the source to improve the mildew phenomenon<br>(2) the 510-0033 packing operation instruction shall be revised immediately. Each layer of the packed products shall be separated by foam cotton, so that the products are not in direct contact with the products. The appearance of the products shall be fully inspected, and the moldy products shall be removed.<br>(3) use dehumidifier to control the temperature and humidity of packaging / finished product warehouse and packaging material warehouse.<br>For the problem of missing burr scraping, the post personnel shall be retrained;<br>