电机拆解机是将斩剪后且还带有铜线圈的电机定子放在升降台上，通过手动开关

The motor dismantling machine is to place the motor stator with copper coil after cutting and cutting on the lifting platform, and control the motor stator to rise to the positioning plate through a manual switch. The positioning plate limits the position of the motor stator, and then controls the clamp to allow The jaws bite the copper coil and pull the copper coil out of the stator to complete the disassembly of the stator.

The motor disassembler is to cut and also with copper coil motor station on the lifting platform, through the manual switch control motor stuter rose to the positioning plate, from the positioning plate to the motor station limit, and then control the pull pliers to let the jaw bite the copper coil, pull the copper coil from the inside of the sting, so as to complete the disassembly of the sting.

The motor dismantling machine is to put the motor stator with copper coil after cutting on the lifting table, control the motor stator to rise to the positioning plate by manual switch, limit the motor stator by the positioning plate, and then control the pulling clamp to let the tongs bite the copper coil, and pull the copper coil out of the stator, so as to complete the stator disassembly.<br>