SECTION 8: Exposure controls/person

SECTION 8: Exposure controls/personal protection8.1. Control parametersOccupational exposure limit valuesnot applicable8.2. Exposure controlsProvide good ventilation. This can be achieved with local or room suction.Personal protection equipmentRespiratory protectionIf concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protectionmust be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protectionapparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number.Hand protectionFor prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber)Thickness of the glove material 0,4 mm Breakthrough time (maximum wearing time) 30 minObserve the instructions and details for use, storage, maintenance and replacement provided by the protective glovemanufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommendedglove articles EN ISO 374Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.Eye/face protectionWear closely fitting protective glasses in case of splashes.Body protectionWear suitable protective clothing and gloves.Protective measuresAfter contact clean skin thoroughly with water and soap or use appropriate cleanser.Environmental exposure controlsDo not allow to enter into surface water or drains. See section 7. No additional measures necessary.