生活水厂沉淀池手动排泥阀自动化程度低，劳动强度大，排泥阀故障率高，（因

The manual mud valve of the sedimentation tank of the domestic water plant has low automation, high labor intensity, and high failure rate of the mud valve. (Because it uses the principle of lever operation, the valve groove is often stuck with sand or foreign matter, which is easy to wear, and the operator uses excessive force. For major reasons, the gate valve is often broken to make it leak). After using the electromagnetic pneumatic rapid sludge discharge valve, the failure rate of the electromagnetic pneumatic rapid sludge discharge valve is low (the valve has no groove and uses a pressure sealing ring); through the GE-102 ultrasonic sludge sounder, the sludge interface in the pool The position is continuously detected online to provide real-time measurement data for related processes, thereby optimizing the control of mud discharge and dosing, and then through the mud layer control of the sedimentation tank for effective adjustment and control, improving the sedimentation efficiency, saving the dosage of chemicals, and optimizing drinking water quality.

The manual discharge valve automation degree of the living water plant precipitation pool is low, the labor intensity is large, the discharge valve failure rate is high, (because it uses the lever principle operation, the valve pull tank often has sand or foreign body stuck easy to wear, the operator force is too large and other reasons often pull the bad gate valve to make it leak). The failure rate of electromagnetic pneumatic rapid mud discharge valve after using electromagnetic pneumatic quick exhaust valve is low (valve no pull tank, pressure seal), through GE-102 ultrasonic sludge bathymetry, the location of the sludge interface in the pool is continuously detected online, providing real-time measurement data for the relevant process, so as to optimize the control of mud discharge and dosing, and thus through the sedimentation tank mud layer control for effective regulation and control, improve the efficiency of potions.

The manual sludge valve of sedimentation tank in domestic water plant has low automation degree, high labor intensity and high failure rate of sludge discharge valve (due to the use of lever principle, sand and stone or foreign matters are often stuck in the groove of valve, which is easy to wear and tear, and the operators often pull the gate valve to make it leak). After using the electromagnetic pneumatic quick sludge discharge valve, the failure rate of the electromagnetic pneumatic quick sludge discharge valve is low (the valve has no groove, and the pressure seal ring is used); through ge-102 ultrasonic sludge depth detector, the position of sludge interface in the pool is continuously online detected, providing real-time measurement data for relevant processes, so as to optimize the sludge discharge and dosing control, and then control the sludge layer in the sedimentation tank Through effective regulation and control, the sedimentation efficiency is improved, the dosage of chemicals is saved, and the drinking water quality is optimized.<br>