S7200的编程语言是STEP7,它是用于S7系列PLC进行编程、调试

The programming language of S7200 is STEP7. It is a brand-new software for programming and debugging of S7 series PLC. It is established on the basis of international standard IEC1131--3 and can be programmed with LAD.CSF and STL. This is a language that can run on a general-purpose microcomputer and be programmed in the WNDOWS environment. Connect it to the MPI port of the PLC through the serial port of the computer and a PCMPI transfer cable, that is, you can communicate with each other. <br>Through the STEP7 programming software, not only can you easily use the trapezoidal circle and statement list to perform offline programming, after compiling, download it directly into the PLC's memory through the transfer cable and execute it, but also can monitor the program online during debugging The on-off status of each input and output or status point, and even online modification of variables in the program, also bring great convenience to the debugging work.

The programming language of the S7200 is STEP7, which is a new software for s7 series PLC programming and debugging, it is based on the international standard IEC1131-3, can be used lad.CSF and STL programming. This is a language that can be run in a general purpose microcomputer and programmed in a WNDOWS environment. By connecting it to the PLC's MPI port via the computer's serial port and a PCMPI transfer cable, it can communicate with each other.<br>Step7 programming software, not only can be very convenient to use trapezoidal circles and statement table and other forms of offline programming, after compilation through the transfer cable directly downloaded into the PLC's memory to perform, but also in the debugging operation, can also be online monitoring the program of the various input sending or state points of the intersection, and even the online modification program variables, to the debugging work also brings great convenience.

The programming language of s7200 is STEP7, which is a new software for S7 Series PLC programming and debugging. It is based on the international standard iec1131-3 and can be used LAD.CSF And STL to program. This is a kind of language which can run in general microcomputer and program in the environment of wndows. It is connected to the MPI port of PLC through the serial port of computer and a pcmpi transfer cable, that is to say, it can communicate with each other.<br>Through STEP7 programming software, it is not only very convenient to use trapezoid circle and statement table for offline programming, but also directly download them into PLC memory for execution through transfer cable after compilation. Moreover, when debugging and running, it can also monitor on-line the on-off status of each input / output or status point in the program, and even modify the variables in the program on-line for debugging It also brings great convenience.